Enjoying a loud car audio system while going for a trip with your friends or alone is fun. You can enjoy the music you love! But what about the car vibrations! Yes, when the volume is high on the stereo, the worst vibration you will feel is related to the rearview mirror.
It will vibrate continuously and the shaking will annoy you throughout the journey. Then how to fix a vibrating rear view mirror and make it comfortable? Let’s talk about it!
Steps to Fix the Rear View Mirror Vibrating
If you are tired of the rattling and vibrations of the rearview mirror, you have to check the roof of your car first. It’s because that is the largest metal body inside your car. To stop this vibration, we recommend you go for the sound deadening material.
Once it is installed, it will absorb the vibrations from your bass and finally, the vibration and rattling will be less. All you will ever listen to is undisturbed music and a perfect view!
Step 1: Locate the Area
When you see a vibrating rearview mirror, you have to think about the metal panels. We are talking about the metal panels covering the upper part of your car. This is what you need to target and fix. Some of the vehicles include a sunroof.
However, if you don’t have one, you get more area. And if you don’t have a sunroof, you will need to cover more area to get rid of the vibrations.
In the case of having no sunroof, it’s easier for you to reduce the vibrations. By covering this part, you can reduce vibrations more than usual.
Step 2: Remove the Extras
It’s time to take a look at the above part of your vehicle. Well, in some cases, there is small or big plastic surrounding this area. There are also times when you will see trim panels connected to this specific area.
No matter what it is, you have to go through the above part of your car and take them off. Check the big or small plastic surrounding the area and remove them. Go for the trim panels and remove them carefully.
Check the area and don’t miss even the small details. There might be a few screws that are added there. Go through them and take them off. It’s time to take a look at the interior headliner carpet.
This is usually positioned on the upper part of the roof inside your vehicle. All you need is to get your hands on the interior headliner carpet and remove it.
Step 3: Flatten the Sound Hardening Device
So, the small and big plastic is removed along with the interior carpet of the roof. Once the carpet bard is removed, it’s time to settle for a sound deadening. All you need is to apply this one to the metal panel.
To do this, you have to go through the sound deadening material first. Get a hold of it and place it on a table. And then, roll it out on the table. In this case, you won’t need to the entire section. So, check how much do you need.
The measurement is necessary when you work with this material. Some of these might come in flat sheets. We recommend you to go for the flat sheets because this will make your job easier. Go through the material and start cutting it according to the measurement. Go for as much as you need for the job.
Step 4: Shape it up
Now that you have cut the sound deadening material according to your measurement, it’s time to add you. All you need is to add it to the top part of your car. Adding it directly is the only option here. When you will add it, the size should be perfectly matched with the shape of the roof.
For this, you have to cut it properly once again. So first, put it directly onto the roof. And here, you will need a blade to cut this. Get the blade and start cutting the material.
Make sure you are cutting in a way that the material is replicating the shape of the roof as we have mentioned here. Some people take off the peelable side first and then cut it. Well, in that case, the installation won’t be perfect.
So, you have to cut the shape depending on the rood first. And then, you have to get your hands on the peelable part of the material.
After you have removed the peelable side’s sticker, you will see the glue side appearing. Take the glue side upwards first. And then, just like you add a sticker to the door, you have to add this one onto the interior of your roof.
Step 5: The Perfection
After you have added the sticker material there, it will stay there. But the installation isn’t completed. For this to be perfect, you have to use your hands. Take your hands on top of the sound hardening material and run your hands over it.
You might need to go a couple of times to certify that the material is sticking to the interior roof properly. Once you are done, you are ready!
Step 6: Reinstall the Carpet
Make sure that you install the carpet you have taken out after you are done with the sticker part. The roof is the major reason why the rearview mirror vibrated. However, the other metal parts of your car might be the reason behind it too.
In this case, you have to find those metal pieces and go through them. You need to install the same sound hardening material on those metal parts so that you can ensure there is no vibration!
How to Fix Vibrating Rear View Mirror Ford Vehicle
Fixing the vibrating rearview mirror is not only connected to the interior roof of your car. Other metal pieces inside your car can cause the same problem. However, the roof is the main concern because it is large and the reason for the vibration is mostly this one. Follow our steps to certify that your rearview mirror isn’t vibrating. In short, whatever the reason is behind the vibration, cover it up!